An ornamental shelf constructed from timber, continuously put in above a hearth, and accessible for buy from a outstanding house enchancment retailer, serves as each an aesthetic characteristic and a useful floor. These architectural parts, typically crafted from numerous wooden species, present a focus inside a room. For example, a house owner would possibly choose a country beam type to enhance a farmhouse-inspired inside.
The inclusion of such a characteristic can considerably improve the visible enchantment of a dwelling house, including heat and character. Traditionally, these buildings have been integral to hearth design, offering assist and directing smoke. Modern purposes lengthen past purely useful roles to embody ornamental shows, permitting for personalization by the location of paintings, pictures, and different treasured objects. The accessibility and selection supplied by retail suppliers make this enhancement readily achievable for a broad vary of shoppers.
The next sections will delve into the assorted varieties, supplies, set up concerns, and ornamental potential related to these available architectural parts.
1. Materials Choices
The fabric composition of a timber shelf bought from a serious house enchancment retailer straight impacts its aesthetic enchantment, structural integrity, and suitability for particular purposes. The selection of wooden, or composite materials, influences elements starting from value and weight to resistance to warmth and susceptibility to warping. For instance, strong hardwoods, corresponding to oak or maple, supply superior sturdiness and a traditional aesthetic, typically commanding a better worth level. Conversely, softwood choices like pine present a extra economical various, albeit with diminished resistance to scratching and denting. The choice due to this fact represents a trade-off between finances, efficiency, and desired visible traits. Moreover, some choices incorporate manufactured wooden merchandise like MDF (Medium-Density Fiberboard) with wooden veneers, offering a cheap and steady choice whereas mimicking the looks of strong wooden.
Retail choices typically categorize supplies by their suitability for numerous hearth varieties, with particular emphasis on warmth resistance. Cabinets supposed to be used above gasoline fireplaces could necessitate non-combustible supplies or require ample clearance from the firebox to forestall ignition. The ending utilized to the materialstain, paint, or sealantalso performs a vital function in its longevity and look, defending the wooden from moisture and UV injury. Understanding these materials properties is crucial for choosing an acceptable product that meets each aesthetic preferences and security necessities.
In abstract, the fabric choices accessible for timber cabinets considerably have an effect on their efficiency, value, and total suitability. Cautious consideration of the supposed utility, desired aesthetic, and budgetary constraints is paramount. Choosing the proper materials, along with correct set up and upkeep, will guarantee a long-lasting and visually interesting addition to the house.
2. Out there sizes
The idea of accessible sizes is intrinsically linked to the utility and applicability of timber cabinets sourced from massive house enchancment retailers. The retailer’s product choices should embody a variety of dimensions to accommodate numerous hearth openings and room proportions. The supply of particular sizes straight dictates whether or not a client can efficiently combine a given shelf into their present architectural context. As an example, a shallow firebox in a compact lounge necessitates a shorter, much less protruding shelf to take care of spatial concord, whereas a grand hearth in a bigger room could accommodate an extended, extra substantial timber construction. The absence of appropriately sized choices would render the retailer’s product successfully unusable for a good portion of potential clients.
Moreover, the collection of an appropriately sized part influences not solely aesthetics but additionally structural integrity. Overly lengthy cabinets, unsupported at their middle, are vulnerable to sagging beneath load. Insufficiently deep cabinets could fail to adequately defend wall surfaces from warmth emanating from the fireside opening. A complete dimension vary permits shoppers to pick out a product that balances visible enchantment with useful efficiency, making certain secure and aesthetically pleasing integration inside their dwelling house. Standardized sizing conventions, typically reflecting widespread hearth dimensions, streamline the choice course of and cut back the probability of incompatibility points.
In abstract, the provision of various dimensions is paramount to the practicality and marketability of those architectural options. A restricted dimension choice restricts applicability and compromises the potential for optimum aesthetic and useful integration inside a house. A complete providing, conversely, empowers shoppers to tailor their choices to their particular wants and preferences, maximizing each visible impression and long-term efficiency.
3. Model Variations
Model variations inside timber cabinets supplied by outstanding house enchancment retailers characterize a important issue influencing client alternative and the general aesthetic integration of this architectural aspect into numerous inside designs. The supply of a broad spectrum of kinds permits householders to pick out a product that enhances their present dcor, starting from conventional to modern.
-
Rustic/Beam Model
This type sometimes includes a rough-hewn look, typically incorporating simulated or precise imperfections to emulate reclaimed timber. It appeals to these looking for a pure, aged aesthetic, generally present in farmhouse or industrial-themed interiors. Examples embrace cabinets with seen knots, simulated cracks, and a distressed end. The country type goals to impart a way of historical past and authenticity, creating a focus with inherent character.
-
Fashionable/Minimalist Model
In distinction to the country aesthetic, the fashionable or minimalist type emphasizes clear strains, clean surfaces, and an absence of ornamentation. These cabinets typically characteristic a easy rectangular profile and a glossy, uniform end, corresponding to a matte black or a refined white. The trendy type seeks to combine seamlessly into modern areas, offering a delicate but useful accent with out overpowering the encompassing dcor. Materials decisions typically embrace engineered wooden with a high-quality veneer.
-
Conventional/Traditional Model
Conventional kinds draw inspiration from historic design motifs, incorporating parts corresponding to ornamental molding, corbels, and elaborate carvings. These cabinets typically characteristic a richer coloration palette, together with darkish wooden stains or painted finishes with vintage glazing. The standard type is meant to evoke a way of ritual and magnificence, complementing extra ornate interiors. Oak and cherry are widespread wooden decisions for this type, reflecting their historic affiliation with positive furnishings.
-
Transitional Model
Transitional kinds bridge the hole between conventional and trendy aesthetics, combining parts of each to create a balanced and versatile design. These cabinets would possibly characteristic clear strains mixed with delicate ornamental particulars, corresponding to a easy bevel or a gently curved profile. Transitional kinds supply a versatile choice for householders looking for a timeless and adaptable aesthetic that may mix with quite a lot of adorning schemes. Impartial coloration palettes and understated finishes are attribute of this type.
The various stylistic choices accessible for timber cabinets facilitate the customization of dwelling areas to mirror particular person preferences and architectural contexts. These type variations cater to a variety of tastes, making certain that customers can discover a product that not solely meets their useful wants but additionally enhances the general visible enchantment of their properties.
4. Set up strategies
The profitable integration of a timber shelf bought from a serious house enchancment retailer hinges critically upon the chosen set up technique. The structural integrity of the set up straight impacts each the security and longevity of the product, in addition to the encompassing architectural parts. Improper set up can result in structural failure, posing a security hazard and probably inflicting injury to the wall or hearth encompass. For example, failing to correctly anchor a heavy beam-style shelf to the wall studs may outcome within the shelf detaching beneath its personal weight or when loaded with ornamental objects. Conversely, deciding on an acceptable mounting method and making certain safe attachment ensures stability and secure operation.
Retailers corresponding to Dwelling Depot present numerous set up {hardware} and steerage tailor-made to completely different wall varieties (e.g., drywall, brick, concrete) and shelf weights. Lag bolts, toggle bolts, and specialised adhesive methods characterize widespread choices, every suited to particular purposes. Set up pointers typically emphasize the significance of finding wall studs for safe anchoring, using leveling instruments to make sure a horizontal aircraft, and verifying weight capability to forestall overloading. As an example, a light-weight shelf is perhaps adequately supported by drywall anchors, whereas a heavier, strong wooden part will necessitate attachment to structural studs. Incorrectly assessing the wall kind and load-bearing necessities can result in an unstable and probably harmful set up.
In abstract, the correlation between set up strategies and the final word performance of a timber shelf from Dwelling Depot is paramount. Adhering to manufacturer-recommended set up procedures, deciding on acceptable {hardware} for the wall kind and shelf weight, and making certain correct leveling are important steps for attaining a secure, steady, and aesthetically pleasing outcome. Failure to prioritize correct set up can negate the advantages of even the highest-quality supplies and designs, finally compromising each security and the supposed visible impression.
5. Load bearing capability
The correlation between the load-bearing capability of a shelf accessible at a serious house enchancment retailer and its supposed utility is a important think about making certain each security and useful efficiency. Load-bearing capability refers back to the most weight a shelf can safely assist with out experiencing structural failure or deformation. This attribute is straight decided by the fabric composition, dimensions, and set up technique employed. The consequence of exceeding this load restrict can vary from unpleasant sagging to catastrophic collapse, probably inflicting injury to property and, in extreme instances, damage to people. For instance, a strong oak shelf with correct stud mounting displays a considerably increased load-bearing capability than a hollow-core shelf put in with fundamental drywall anchors. Ignoring specified weight limits, particularly with heavier objects corresponding to books or ornamental stone objects, can result in untimely failure.
The specs for objects offered by Dwelling Depot sometimes embrace weight capability info, both on the packaging or within the product description on-line. Understanding and adhering to those pointers is paramount. As an example, if a client intends to position a group of heavy cast-iron cookware on the timber construction, they need to choose a mannequin with enough load-bearing capability to accommodate the mixture weight. Selecting a lighter-duty product supposed for purely ornamental objects can be inappropriate and unsafe. A sensible instance can be a house owner making an attempt to show a heavy ceramic vase on a mantel solely rated for lighter objects, ensuing within the shelf bowing and even detaching from the wall.
In abstract, the load-bearing capability of cabinets is an important consideration of their choice and utility. Exceeding the required weight limits presents an actual and avoidable danger. Understanding the connection between materials properties, set up strategies, and weight capability empowers shoppers to make knowledgeable selections, making certain the secure and efficient utilization of merchandise bought from house enchancment retailers like The Dwelling Depot.
6. Ending choices
The collection of acceptable ending choices for timber cabinets procured from house enchancment retailers like Dwelling Depot straight influences their aesthetic enchantment, sturdiness, and resistance to environmental elements. The accessible finishes cater to numerous design preferences and useful necessities, impacting the long-term efficiency and upkeep of the wooden part.
-
Staining
Staining entails the appliance of a coloured liquid to penetrate the wooden, enhancing its pure grain patterns and imparting a particular hue. The collection of a stain coloration permits for seamless integration with present inside dcor. For instance, a darkish walnut stain utilized to an oak shelf can complement conventional furnishings, whereas a lighter, pure stain can improve a contemporary aesthetic. Staining additionally offers a level of UV safety, mitigating coloration fading over time. Nevertheless, stain alone gives minimal safety in opposition to moisture and abrasion, necessitating a topcoat for enhanced sturdiness.
-
Portray
Portray offers a whole coloration transformation, concealing the wooden grain and providing a uniform look. The collection of paint coloration permits for daring design decisions and exact matching to present coloration schemes. For instance, a house owner would possibly select to color a shelf a vivid white to distinction in opposition to a darkish hearth encompass or choose a muted grey to mix seamlessly with a recent inside. Whereas paint offers a protecting barrier in opposition to moisture, its sturdiness can differ considerably based mostly on the kind of paint used. Excessive-quality acrylic paints supply superior resistance to chipping and scratching in comparison with cheaper alternate options.
-
Sealing/Clear Coating
Clear coatings, corresponding to varnish, lacquer, or polyurethane, present a clear protecting layer that enhances the wooden’s pure magnificence whereas safeguarding it from moisture, scratches, and UV injury. These coatings can be found in numerous sheens, starting from matte to excessive gloss, permitting for personalisation of the ultimate look. For instance, a matte polyurethane end can present a delicate, pure look whereas providing wonderful safety in opposition to each day put on and tear. The selection of sealant impacts each the sturdiness and aesthetic qualities of the completed product.
-
Distressing/Antiquing
Distressing and antiquing strategies contain artificially ageing the wooden to create a country or classic look. These strategies could embrace sanding edges to disclose underlying layers, making use of crackle finishes to simulate aged paint, or utilizing specialised stains to create a worn look. For instance, a shelf distressed with darkish wax can emulate the look of reclaimed timber, including character and allure to a farmhouse-style inside. Whereas these strategies primarily give attention to aesthetics, they will additionally assist to hide minor imperfections and scratches.
These ending choices characterize important concerns within the choice and customization of timber cabinets. The chosen end impacts not solely the visible enchantment but additionally the longevity and upkeep necessities, straight influencing the general worth and satisfaction derived from the product. Cautious consideration must be given to the supposed utility, desired aesthetic, and stage of safety required to make sure a long-lasting and visually pleasing outcome for buildings bought from Dwelling Depot.
7. Code compliance
Adherence to constructing codes is a non-negotiable side within the choice and set up of timber cabinets sourced from main house enchancment retailers like Dwelling Depot. Constructing codes are authorized mandates established by governing authorities to make sure public security and structural integrity. The relevance to those cabinets primarily revolves round fireplace security, structural assist, and, in some jurisdictions, accessibility pointers. A failure to adjust to related codes can lead to fines, necessary alterations, and even denial of occupancy. For instance, native codes could stipulate minimal clearances between flamable supplies, corresponding to a timber shelf, and the firebox opening of a fireside. Inadequate clearance can improve the danger of ignition and subsequent fireplace hazard.
These merchandise are sometimes regulated regarding their proximity to warmth sources, notably in hearth purposes. Codes typically specify the kind of supplies that can be utilized close to a hearth and the required distances from the firebox. A typical regulation would possibly dictate a minimal of six inches of clearance from the highest of a fireside opening to any flamable materials, corresponding to a wooden shelf. Moreover, codes could stipulate that cabinets put in in sure places, corresponding to in public areas or multi-family dwellings, should meet particular fire-resistance requirements. Non-compliance can result in important authorized and monetary repercussions. For instance, a house inspector could flag a non-compliant set up throughout an actual property transaction, requiring the vendor to rectify the problem earlier than the sale can proceed.
In conclusion, the intersection of constructing code necessities and commercially accessible timber cabinets is a matter of paramount significance. Shoppers should confirm that their choices and set up practices align with native code stipulations to make sure security, keep away from authorized penalties, and keep the structural integrity of their properties. Whereas retail merchandise could supply aesthetic enchantment and useful utility, adherence to regulatory requirements stays the overriding crucial. Cautious consideration to code compliance is integral to any shelf set up to forestall security hazards and guarantee authorized compliance.
8. Price concerns
The financial side of buying a timber shelf from a serious house enchancment retailer is a multi-faceted consideration encompassing preliminary buy worth, set up bills, long-term upkeep prices, and potential impacts on property worth. These parts collectively decide the true value of integrating such a characteristic into a house.
-
Materials Composition and Pricing Tiers
The collection of supplies, starting from strong hardwoods to manufactured composites, straight influences the preliminary buy worth. Strong hardwoods like oak and cherry sometimes command increased costs as a consequence of their superior sturdiness and aesthetic qualities. Conversely, softwood choices like pine, or composite supplies with wooden veneers, supply extra economical alternate options. The pricing tiers straight mirror these materials variations, with budget-conscious shoppers typically choosing lower-cost choices whereas these prioritizing longevity and aesthetics could put money into premium supplies. The selection requires a balancing act between budgetary constraints and desired high quality. As an illustration, a easy pine shelf may cost beneath $100, whereas a strong oak model may exceed $300 on the similar retailer.
-
Set up Prices: DIY vs. Skilled
Set up represents a major value consideration, influenced by the complexity of the undertaking and the house owner’s talent stage. A do-it-yourself set up can reduce bills by avoiding skilled labor costs. Nevertheless, it necessitates possessing the requisite instruments, abilities, and data of constructing codes to make sure a secure and compliant set up. Alternatively, skilled set up ensures experience and adherence to code necessities, however incurs labor prices that may considerably improve the general undertaking expense. As an example, skilled set up would possibly add a further $100-$500 to the overall value, relying on the complexity of the set up and regional labor charges. The choice hinges on a trade-off between value financial savings and the peace of mind of a professionally executed set up.
-
Lengthy-Time period Upkeep and Sturdiness
The long-term upkeep necessities and sturdiness of the chosen construction impression the general value of possession. Supplies which are extra proof against moisture, scratches, and UV injury require much less frequent upkeep, lowering the necessity for repairs, refinishing, or substitute. For instance, a correctly sealed hardwood shelf could require solely occasional cleansing, whereas an unsealed softwood model could necessitate periodic refinishing to forestall deterioration. The upfront funding in a extra sturdy materials can lead to long-term value financial savings by minimizing upkeep bills and lengthening the lifespan of the shelf. This highlights the significance of contemplating the overall value of possession, not simply the preliminary buy worth.
-
Impression on Property Worth
The set up of a high-quality, aesthetically pleasing can probably improve property worth, offering a return on funding. A well-designed and correctly put in characteristic can add character and visible enchantment to a dwelling house, making it extra enticing to potential patrons. Conversely, a poorly put in or aesthetically unappealing part may detract from the general worth of the house. A strategically chosen and expertly put in aspect will be seen as an improve, growing the marketability of the property. The extent of the worth added depends upon the general high quality of the set up and its integration with the prevailing architectural type.
These value concerns underscore the significance of cautious planning and knowledgeable decision-making when deciding on and putting in shelving parts from house enchancment retailers. A complete evaluation of fabric prices, set up bills, upkeep necessities, and potential impression on property worth permits shoppers to make economically sound decisions that align with their budgetary constraints and long-term funding targets. An instance can be deciding on a mid-range composite materials that balances value, sturdiness and upkeep.
9. Ornamental potential
The inherent ornamental potential of timber cabinets accessible at a serious house enchancment retailer extends past mere performance, reworking them into pivotal design parts inside a dwelling house. The adaptability of those architectural options to numerous adorning kinds permits for substantial personalization, impacting the ambiance and visible narrative of a room.
-
Seasonal Shows
The horizontal floor offers a platform for curating seasonal shows that mirror the time of 12 months. Throughout autumn, gourds, colourful leaves, and miniature pumpkins would possibly adorn it, whereas winter may showcase evergreens, candles, and festive ornaments. This strategy permits for the continual refreshment of the room’s dcor, sustaining visible curiosity all year long. The benefit with which objects will be interchanged makes this a dynamic ornamental technique. An instance can be swapping summer season seashells for autumnal foliage because the seasons change.
-
Personalised Collections
The buildings function a stage for showcasing private collections, starting from vintage collectible figurines to curated artwork items. Strategically arranging these things permits householders to specific their particular person tastes and pursuits, making a visually partaking point of interest. Considerate grouping, the usage of various heights, and the incorporation of unfavorable house contribute to a balanced and aesthetically pleasing show. As an example, a group of classic cameras organized alongside related books can create a compelling narrative reflecting the house owner’s passions.
-
Illumination Integration
Integrating lighting parts enhances the ornamental potential by including depth and dimension to the show. Small lamps, strategically positioned candles, or the incorporation of string lights can create a heat and alluring environment. The interaction of sunshine and shadow can intensify textures and spotlight particular person objects, reworking the shelf right into a charming visible aspect, particularly throughout night hours. An instance consists of the location of fairy lights round trailing vegetation to create a smooth, ambient glow.
-
Textural Contrasts
Using quite a lot of textures throughout the ornamental association provides visible curiosity and tactile enchantment. Combining clean surfaces, corresponding to glass vases, with rougher textures, corresponding to woven baskets or pure stone, creates a dynamic distinction that engages the senses. The interaction of textures contributes to a extra layered and complex aesthetic. For instance, a clean ceramic sculpture positioned alongside a textured linen-covered guide creates a visually interesting juxtaposition.
The ornamental potential supplied by these picket architectural part from Dwelling Depot is huge, restricted solely by particular person creativity and stylistic preferences. Cautious consideration of seasonal themes, private collections, illumination methods, and textural contrasts permits the transformation of a easy shelf into a strong design assertion, enriching the general visible expertise of the dwelling house. Such examples present a basis for householders to construct their design utilizing readily-available materials.
Incessantly Requested Questions About Timber Cabinets at Main Dwelling Enchancment Retailers
This part addresses widespread inquiries regarding timber cabinets accessible from massive retailers, offering factual info to help in knowledgeable buying selections.
Query 1: What sorts of wooden are generally used within the development of cabinets offered at Dwelling Depot?
Reply: Widespread wooden varieties embrace pine, oak, maple, and poplar. Moreover, some cabinets make the most of engineered wooden merchandise corresponding to MDF (Medium-Density Fiberboard) with wooden veneers. The collection of wooden species influences the shelf’s aesthetic, sturdiness, and worth level.
Query 2: What’s the most weight that these cabinets can sometimes assist?
Reply: Load-bearing capability varies relying on the shelf’s materials, dimensions, and set up technique. Producers sometimes present weight limits on product packaging or on-line descriptions. It’s important to stick to those limits to forestall structural failure.
Query 3: Are the cabinets pre-finished, or does ending require a separate buy and utility?
Reply: Some cabinets are offered pre-finished with stain, paint, or a transparent coating, whereas others are unfinished, permitting for personalisation. Unfinished cabinets necessitate the acquisition of ending supplies and their subsequent utility.
Query 4: What {hardware} is required for set up, and is it included with the product?
Reply: Set up {hardware} necessities rely on the wall kind and the shelf’s weight. Some cabinets embrace fundamental mounting {hardware}, whereas others require separate buy. It’s important to pick out acceptable {hardware} suitable with each the shelf and the wall to make sure a safe set up.
Query 5: Are the supplies used code-compliant to be used close to a hearth?
Reply: Not all supplies are appropriate for hearth purposes. Constructing codes typically stipulate minimal clearances between flamable supplies and the firebox opening. It’s the purchaser’s duty to confirm compliance with native codes earlier than set up close to a hearth.
Query 6: What are the upkeep necessities for cabinets, and the way can injury from moisture or scratches be prevented?
Reply: Upkeep necessities differ relying on the end utilized. Common cleansing with a smooth fabric is mostly really helpful. Harm from moisture will be prevented by making use of a sealant or varnish. Scratches will be minimized through the use of coasters or pads beneath heavy or abrasive objects.
These FAQs present a concise overview of key concerns associated to those Dwelling Depot picket architectural options. Further analysis could also be needed to deal with particular set up necessities and native constructing codes.
The succeeding phase will discover inventive design methods.
Important Issues for Retail Timber Cabinets
The next pointers supply insights for choosing and using timber cabinets accessible from main house enchancment retailers, aiming for optimum aesthetic and useful outcomes.
Tip 1: Prioritize Correct Measurement. Earlier than buying, meticulously measure the supposed house. Account for the shelf’s dimensions, together with depth, width, and thickness, to make sure seamless integration throughout the designated space. For hearth purposes, guarantee ample clearance from the firebox opening as mandated by native constructing codes.
Tip 2: Scrutinize Materials Properties. Consider the traits of accessible supplies, corresponding to hardwood, softwood, or engineered wooden. Hardwoods supply superior sturdiness and aesthetic enchantment, whereas softwoods present a extra economical various. Engineered wooden merchandise supply stability and resistance to warping. Choose a fabric that aligns with finances, aesthetic preferences, and useful necessities.
Tip 3: Account for Load-Bearing Capability. Assess the anticipated load the shelf will bear. Producers sometimes present weight limits; exceeding these limits can lead to structural failure. Select a shelf with enough load-bearing capability to accommodate the supposed contents, prioritizing security and longevity.
Tip 4: Adhere to Set up Pointers. Observe the producer’s set up directions meticulously. Make use of acceptable mounting {hardware} appropriate for the wall kind (drywall, brick, concrete) and the shelf’s weight. Securely anchor the shelf to wall studs at any time when attainable to make sure stability. Correct set up is paramount for security and stopping structural failure.
Tip 5: Make use of Acceptable Ending Strategies. If the shelf requires ending, choose acceptable stains, paints, or sealants based mostly on the specified aesthetic and stage of safety. Completely put together the wooden floor earlier than making use of any end, and cling to the producer’s directions for optimum outcomes. Correct ending enhances sturdiness and protects the wooden from moisture and UV injury.
Tip 6: Consider Model Compatibility. Select a shelf type that enhances the prevailing inside design. Take into account the room’s total aesthetic, whether or not it’s conventional, trendy, rustic, or transitional. Choose a shelf with a profile, end, and ornamentation that harmonizes with the encompassing dcor to create a cohesive visible assertion.
By adhering to those pointers, shoppers can improve their choice, set up, and utilization of retail timber cabinets. Prioritizing security, performance, and aesthetic compatibility ensures a profitable and visually pleasing integration of this architectural aspect throughout the house.
The next evaluation concludes this exploration.
Conclusion
The previous evaluation has detailed important elements related to house depot wooden mantel choices. Materials concerns, dimensional constraints, stylistic variations, set up protocols, load-bearing capabilities, ending processes, code compliance mandates, value elements, and ornamental potential have been comprehensively explored. Understanding these parts is essential for knowledgeable client decision-making.
The profitable integration of an ornamental timber aspect from a house enchancment retailer calls for diligent planning and execution. Adherence to security pointers and constructing codes stays paramount. The considered utility of those ideas will improve the aesthetic enchantment and useful worth of the architectural aspect inside a residential setting. Additional analysis into particular native rules is strongly inspired earlier than initiating any set up.
